Item Description

The P200 has two distinct modes of operation, STEREO and BRIDGE mode. You can change the operating mode by reconfiguring the output connections. You can then use the STEREO INPUT / BRIDGE INPUT selector switch to select the input source for the chosen operation mode.

Stereo Mode

Rated output power: 2 x 100 W
Input impedance, Balanced Stereo IN: 40 kOhm
Input impedance, Unbalanced Stereo IN: 10 kOhm
Input sensitivity, Balanced Stereo IN: 480 mV, to rated output
Input sensitivity, Unbalanced Stereo IN: 480 mV, to rated output
Gain: +35.4 dB (RL = 8 Ohm)
Frequency response: 18 Hz to 60 kHz (-3 dB, rated output)
Total Harmonic Distortion: < 1.2% (f = 1 kHz, rated output)
Signal-to-noise ratio: > 100 dB (RL = 8 Ohm, rated output)
Load impedance: 4 or 8 Ohm

Bridge Mode

Rated output power: 1 x 200 W
Input impedance, Bridge IN: 20 kOhm
Input sensitivity, Bridge IN: 1V, to rated output
Gain: +32 dB (RL = 8 Ohm)
Frequency response: 20 Hz to 55 kHz (-3 dB, rated output)
Total Harmonic Distortion: < 2% (f = 1 kHz, rated output)
Signal-to-noise ratio: > 100 dB (RL = 8 Ohm, rated output)
Load impedance: 8 Ohm

General

Number of input ports / channel:
1 unbalanced Stereo IN
1 balanced Stereo IN
1 balanced Bridge IN

Number of output ports / channel: 1 unbalanced Power OUT

Tubes required:
4 x KT120 (KT150 or KT170 optionally)
2 x 6922
2 x 12AX7

Weight: 26 kg
Dimensions: 43 x 46 x 21 cm
Power requirement: 720 W