The Leben CS-600X integrated amplifier is one of the reasons why there is a Leben Audio Lovers’ Club in Japan and so many Leben Lovers around the World.
Attention! We can only supply 230V Leben devices.
Leben
CS-600X Integrated Amplifier
The Leben CS-600X integrated amplifier is one of the reasons why there is a Leben Audio Lovers’ Club in Japan and so many Leben Lovers around the World.
Attention! We can only supply 230V Leben devices.
€ 5.927,4
Available on backorder
Item Description
Two selections of output tubes: 6L6GC(5881) and optional 6CA7(EL34) tubes
By switching two selectors inside of the cabinet, you can use either of 6L6GC or 6CA7 (EL34) , and LED indicators on the front panel will show you which tube is applied.
Power Amplifier direct switch & inputs
“PREAMP-IN” terminals on the rear panel allow you to use CS-600 as a power amplifier.
By switching a selector on the front panel, by-pass all the functions only excepting a Volume control.
A Wide Range of speaker application
Multi output impedance selector: 4/6/8/16 ohms.
Flat and Wide FREQUENCY RESPONSE
A wide-ranged and flat frequency response up to 100KHz is enough capable for future digital audio format such as SACD/HDCD.
Other Features
– Twin-triode tube 6CS7 for the first-stage amplification.
– WBT type speaker terminals.
– Heavy-duty output transformer for 50W grade amplifiers.
– Large capacity choke-coil: 5H350mA
– Dumper tube 6CJ3 (for Colour TV use) is applied to delay a supply of high voltage (B-Voltage) to output tubes in order to protect output tubes from damages and to longer the life.
– All high-end audio grade electrical components (condensors, resistors)
– Operation lamp indicator
– Succeeding a front design of CS-300/CS-300X.
– 24K Gold-Plated Knobs.
– Side Wood-Panels.
Five Inputs
CS-600 is equipped with 5 line inputs (RCA unbalanced) plus Tape Monitor
Full Functions for Integrated Amp.
1. Power Amp Direct Switch. (All functions by-pass only excepting Volume control)
Muting Switch.
2. Stereo/Reverse Switch.
3. Variable Output Impedance: 4/6/8/16 Ohms.
4. Tape Monitor Switch.
5. Bass Boost Switch.
6. Headphone Output.
7. Speaker/Headphone Selector Switch.
8. Tube Indicator Lamps.
9. Operation Lamp Indicator.
Specifications
Tubes Equipped: (4) 6L6GC (5881) SOVTEK, (EL34/6CA7 – Option), (4) 6CS7, (1) 6CJ3
Output Power: 32W x 2 (6L6GC) at 1KHz, 28W x 2 (EL34) at 1KHz
Frequency Response: 15Hz – 100KHz (-2 dB)
Distortion: 0.7%(10W)
Input Sensitivity: 900mV at 20W
Output Impedance: 4/6/8/16 Ohms (Selectable)
Weight: 22.5 Kgs.
Dimensions: 450 (W) X 360 (D) X 142 (H) mm
Attachment: Detachable AC Power Cable x 1
