The Audio Hungary – QUALITON Phono is a premium category vacuum tube phono stage with extreme low noise and distortion level, made for complementing the series Qualiton.

Audio Hungary

QUALITON Phono Amplifier

Cat No: AHUN-PHONO
Type: MM/MC Phono Stage

The Audio Hungary – QUALITON Phono is a premium category vacuum tube phono stage with extreme low noise and distortion level, made for complementing the series Qualiton.

 2.661,3

Shipping within 10-15 days

Item Options

There are options and extras that you can choose to upgrade the standard version of this product.

DHL offers shipping insurance at the cost of 1% of the product’s value. Recommended for products priced €300 and above.

Available on backorder

Item Description

A premium category vacuum tube phono stage with extreme low noise and distortion level, made for complementing the series Qualiton. On its input, the appliance can receive low level signals coming from moving magnet cartridges.

Optionally at extra charge, with the help of the changeable card at the rear panel, the circuit can be re-configurated, this way, the appliance will be able to process signals coming from moving coil cartridges. In the signal transmitting circuit, signal processing is done by Tungsram ECC83 as well as Tesla E88CC double triodes.

The standard RIAA correction is realised by a classic passive network between the amplifying stages. In this case, we did not use a negative feedback.

The nominal input sensitivity of the appliance is 5 mV. In response to an input signal with an effective value like this, at the output ports an effective output signal value of the nominal 500 mV can be measured.

In order to achieve the lowest possible noise level, we have designed an external, stabilised power supply unit for the appliance with high capacity filter capacitors and high quality connectors. In this respect, we were not willing to settle for any compromises either, considering that this construction is much more advantageous than a usual configuration. In the case of the latter, the scattered magnetic field of the power supply transformer has a significantly adverse effect on the signal-to-noise ratio of the signal transmitting circuit, directly deteriorating the musical experience.

Specifications

Nominal output level: 500 mV
Input sensitivity – with MM card: 5 mV, to nominal output level
Input sensitivity – with MC card: 0.4 mV, to nominal output level
Number of input ports: 1 MM-level input per channel, or optionally 1 MC-level input per channel
Number of output ports: 1 line level output per channel, with 500 mV nominal output level
Max. input signal – with MM card: 100 mV
Max. input signal – with MC card: 2 mV
Gain – with MM card: +40 dB, (f = 1 kHz)
Gain – with MC card: +62 dB, (f = 1 kHz)
Total harmonic distortion – with MM card: < 0.07%, (f = 1 kHz, input level: 5 mV)
Total harmonic distortion – with MC card: < 0.2%, (f = 1 kHz, input level: 0.4 mV)
Frequency response: 20 Hz – 20 kHz, (-0.3 dB)
Input impedance – with MM card: 6 kOhm – 270 kOhm (variable), default: 47 kOhm
Input impedance – with MC card: 18,3 Ohm – 837 Ohm, default: 145 Ohm
Signal-to-noise ratio – with MM card: > 70 dB
Signal-to-noise ratio – with MC card: > 65 dB
Tubes required: 4 x ECC83; 2 x E88CC
Weight: 5.4 kg
Dimensions: 35 x 8 x 30 cm